User Manual

Page 51
This menu has been designed for use in conjunction with the Timed TUM mode. Setting
dates in this menu that coincides with public holidays, alleviates the need to cancel
TUM manually prior to each holiday event. When a date has been set in this menu,
Timed TUM will not be armed and therefore will not activate, even with recognition of a
registered User.
 Twelve Holiday events may be entered into the system.
 The menu may be setup for the holiday to occur every year (e.g. Dec 25) or a
“one off holiday” for a particular year. Holidays set in this mode will repeat until
2099.
 The “Cancel TUM” command in the main menu will not cancel holiday dates,
they must be deleted individually.
Please read the Important Tips below prior to setting the time fields.
 On initial setup, the system will display dashes (-- : --) in all fields
 Pressing M will highlight the first “- -” field. Using the Up/Down arrow keys will
insert your desired time
 Pressing M to the next field will highlight the next “- -”. Use the Up/Down arrow
keys to enter a time. Repeat this for all the remaining fields. If a time is not
inserted and M is pressed again, ALL data fields will revert to “- -”. You will then
be prompted to “SAVE” this entry and required to start again. This is an
intentional design and is the second way to cancel/void TUM for a particular
day.
 Once all time fields have been entered, pressing M when the “ARM?” icon has
been highlighted will change the text to “ARMED!” and the system will
automatically return to the previous menu. Do not go back into the previous
menu unless you intend to change a data field. If you go back into the previous
menu, the “ARM?” prompt will appear again. Press E to exit and all previous
data will be retained.
 If you press M, the first data field will revert to “- -”. To exit this menu with no
changes to the data, press E. All data will be retained.
 If M is pressed again, ALL data fields will revert to “- -”. You will be prompted to
“SAVE” this entry and required to start again. This is an intentional design.
Note: if a registered user uses their FP or PIN while in Timed TUM, the RTS will re-
enter a locked state. Simply re-enter FP or PIN to regain Timed TUM status.
7.9.5.1 Holiday Example 1 – Repeating Holiday
In this example we will program Dec 25 to Dec. 31 be a holiday every year.