User Manual

Page 48
 If M is pressed again, ALL data fields will revert to“- -”. You will be prompted to
“SAVE” this entry and required to start again. This is an intentional design.
Note: If a registered user uses their FP or PIN while in Timed TUM, the RTS will re-
enter a locked state. Simply re-enter FP or PIN to regain Timed TUM status.
7.9.3.1 Example – Setup Days
Example 1. Lock will be programmed for TUM mode on ALL days from 08:00 to 17:00
except Sunday. We will program ALL days at once and then program Sunday as a
separate day.
1) In the Lock Setup menu scroll
down to Option 7 “Timed TUM”.
Press M.
2) Scroll to Option 1 “Setup”.
Press M.
3) Scroll to Option 2 “Setup Days”.
Press M.
4) Press M to select 1 “ALL”.
5) Press M to highlight the first
data field.