User Manual

ManualsBrandsWestinghouse ManualsDoor Hardware & LocksWestinghouse RTS-Z PIN Code Lock with Z-Wave & Fingerprint Reader

Page 35

Ex. User ID 005 would use the keypad to unlock the lock using this sequence:

(5 + # +FP) or (5 + * + PIN + *)

7.5 Lock ID

2) 1:N - When this is chosen, all

users enrolled at this lock only need

to match their enrolled Fingerprint

OR PIN Code to unlock the door.

This is the factory default setting.

3) 1:1 – When this is chosen, all

users enrolled at this lock must

enter their User ID and verify their

enrolled Fingerprint or PIN Code to

unlock the door.

6) “SAVED!” indicates that the

Match Mode settings were saved.

This will display momentarily and

then the setup menu will be shown.

4) 1&N - All enrolled users can use

either the 1:1 or 1:N method to

unlock the door.

5) Use the Up/Down arrows to scroll

thru the matching modes until the

desired mode is reached and then

press M to save the setting.