User Manual

Page 29
Note: The following instructions assume there are no fingerprints enrolled in the RTS.
All setup functions can be done before enrolling an Administrator fingerprint or PIN
code. If an Administrator fingerprint is entered before starting the lock setup, fingerprint
verification will be required each time the lock is accessed for a program change. It will
save time to complete the lock setup before enrolling any Administrator or User FPs and
PWDs.
7.2 Date/Time
Date and Time setting of the RTS is critical when using the MS1 Management Software
to ensure accurate time/date stamps for Audit Trail and accurate time/date for Access
Control.
E button
Default date, time, and day of the week.
Lock ID
Battery voltage level
1) Press M, the lock will display in
succession:
Current Firmware Version