User Manual

Page 13
3.3 Removing Battery Cover
1) Place the fixing plate over the 2
1/8” hole on the inside of the door.
2) Align the center hole of the
fixing plate with the spindle hole of
the latch.
3) Screw the fixing plate onto the
door with the provided 1 1/2”
screws.
DO NOT over tighten the screws.
Make sure that the square cut-out
on the fixing plate is facing down
and the indented screw holes are
facing outward.
1) Remove the battery cover of
the inside unit by unscrewing the
screw shown. This will make
installing the inside unit an easier
process.