User manual

10
20
INSTALLING THE APPLIANCE
10 Slide the cooker back into the anti-tilt
brackets, so that the splashback rests
against rear wall.
11 Check for height and level of the
product. Pull the cooker forward,
adjust the levelling feet, and return
to final position.
12 Connect services and commission the
cooker (see commissioning section).
13 Fit removable kick rail, or screw
on the kick panel.
9 Securely fix both anti-tilt brackets to the floor, using the fasteners provided. Locate the
brackets against the rear wall so that the outside edges are 600mm apart. Two
fasteners must be used on each bracket and the fasteners must suit the floor material.
Note: The splashback must be in contact with the rear wall for the feet to be engaged
in brackets.