User manual

16
OPERATION
2-hour “Auto Off” timer
The 2-hour timer features an automatic oven “cut off”.
This means that a cooking period of up to 120 minutes
can be set. When the timer has counted back to “Auto Off”
a bell will sound and the oven will automatically switch off.
Once automatic baking is complete, return to manual
operation by setting the timer to the ‘O’ mark.
NOTE: It is not recommended to use this timer for short
durations (e.g. boiling eggs).
ELECTRONIC CLOCK
Touch Control (selected models only)
General features
Your touch control clock has the following features:
• Timer – allows you to set a countdown time that will
beep when the set time has elapsed.
• Cooking duration – You can set a cooking duration.
A timer will count down the preset cooking time, beep
when the time has elapsed and turn the oven off.
• End cooking time – you can set a cooking finish time.
A timer will count down the preset cooking time, beep
when the finish time has been reached and turn the
oven off.
• Delayed start cooking time – You can combine the
cooking time and stop cooking time to switch the oven
on and off at a specific time during the day.
Note: Your touch control clock only operates with
your upper oven.
Setting the time of day
You must set the time of day before you can operate your
appliance. When power is supplied to your oven “12.00“
will be displayed and the “clock” indicator I will flash.
1. To set the time of day in hours and minutes, press – or +.
5 seconds after the last change, the “clock” indicator I
will disappear, confirming the time has been set.
Note: The clock has a 24-hour display.
Change the time of day (Daylight saving)
1. Press “mode” until the “clock” indicator I begins flashing.
2. Press – or + to change the time. 5 seconds after the
last change, the “clock” indicator I will disappear,
confirming the time has been set.
Setting the timer
1. Press “mode“ until the “timer” indicator I begins flashing.
2. Set the countdown time you want by using – and +.
5 seconds after the last change the “timer” indicator I
will stop flashing, confirming the timer has been set.
3. To stop the beeper, press –, + or “mode”.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature.
The oven indicator light will glow and the heating
source will come on.
3. Press “mode“ until the “cook time” indicator I
begins flashing.
OPERATING THE ELECTRONIC CLOCKCOOKING WITH YOUR TIMER
WMAN_EOVEN_Jun11.indd 16 13/07/11 3:57 PM