INSTRUCTIONS HOT PLATES BOOKLET AU
WHEN YOU CALL FOR SERVICE When you call for service or order parts for your unit, be sure to give: 1. MODEL 2. SERIAL NUMBER 3. COLOUR 4. PART NAME and/or description of problem 5. YOUR FULL NAME, ADDRESS, and HOME TELEPHONE NUMBER and BUSINESS TELEPHONE NUMBER IF APPROPRIATE. Servicing shall be carried out only by authorised personnel.
Note: The cooker is fitted with 4 legs for an eventual alignment in height with the furniture ( fig. 1 A or 1 B according to the models ). Clearances to combustible materials "0" mm "0" mm Fig. 1 A WARNING: This appliance is not suitable to be installed on a base TO FIX THE COOKER TO THE REAR WALL WARNING - For safety reasons and to prevent tipping of the appliance, these stabilizing means must be installed.
GAS CONNECTION The appliance shall be installed by an authorized person in accordance with the manufacturers installation instructions, relevant local fitting regulations, municipal building regulations, the AS5601 code for gas burning appliances and equipment and other relevant statutory code band regulations. If you have some doubts, please contact the authorities for confirmation concerning the characteristics of the gas and electricity output.
2nd SECTION FOR THE USER - change the injector (see Fig. C) and replace it with another one suitable for the new type of gas (see tab. 1) WARNING: Children should be kept away while the oven or grill is in use since accessible parts become hot. Fig. C MINIMUM FLOW ADJUSTMENT FOR HOB-TOP TAPS In order to adjust the minimum flame setting proceed as follows: switch the burner on, and set the knob at the minimum position .
Always use pans with a flat base diameter, which are well balanced and stable in use, a pan which overhangs the hotplate should not be used. Avoid using old, misshapen pans, or pans which are unstable when placed on a flat surface. Do not use “split pans” as they are inherently unstable. To save gas, always position pans centrally over the burners and adjust the flames so that they do not lick up the sides of the pan and only the base is heated.
Use of the oven Note: ovens with separate thermostat and commutator. When the functions Grill and Fan Grill are used, place the thermostat knob between 180 ÷ 200°C as maximum temperature. HOW TO USE YOUR ELECTRIC OVEN - Before cooking in the first time we reccommend that the oven should be operated at 200° C for 30 minutes to remove any manufacturing greases and odours. - Do not place items or pan directly on to the oven botton.
conventional oven, using one tray only. Cooking results are a matter of personal preference and may easily be adjusted to suit individual requirements by slight adjustment of the temperature and or cooking time. Preheating of the oven is recommended for 10-15 minutes or until the oven thermostat indicator light switches off to show the selected temperature has been reached.
USlNG THE GRILL The grill is situated in the top of the oven compartment. The grill pan should be located on the top oven shelf position. Always grill with the door closed. COOKING TIME AND COOKING END TIME Press the mode button until L1 flashes. Set the desired cooking time as described at “COOKING TIME”. Press the mode button until L2 flashes then set the desired cooking end time as described in the paragraph “COOKING END TIME”.
Daily Regular wiping down directly after use prevents dirt from burning on. Clean the appliance with water and a detergent or all purpose cleaner. Avoid using too much water to prevent it entering the burner or ventilation openings. CLEANING Before cleaning the appliance, close the gas stopcock and unplug appliance or disconnect power at the main circuit breaker of the electrical system. Do not clean the appliance surfaces when still hot.
Removal of oven door In-depth cleaning of the oven becomes more convenient if the door is removed following the instructions below: WARNINGS Before performing any repair or operation, switch the appliance off and close the gas tap. The manufacturer declines all responsibility for any damage to persons, animals or things caused by failure to observe the rules indicated above. In case it is necessary to repair or replace the inside components, act as follows: 1 open the oven door completely.
GREASING OF TAPS If a tap becomes hard to be turned, grease it using a specific grease withstanding high temperatures. Act as follows: open the work-top and disassemble also the control panel as described on the previous paragraph. Unscrew the two fixing screws from the burner body (see picture) and remove the cone. A Fig. 15 A TAPS REPLACEMENT Act as follows: open the work-top and disassemble also the control panel as described on the previous paragraph.
PROBLEM SOLVER SOME SAFETY POINT Any of the following are considered to be abnormal operation and may require servicing: Yellow tipping of the hob burner flame. Sooting up of cooking utensils. Burners not igniting properly. Burners failing to remain alight. Burners extinguished by oven door. Gas valves, which are difficult to turn. Do not use the appliance as a space heater. If you smell gas Open a window. Do not use any electrical switches. Immediately extinguish naked flames.
OVEN DOES NOT WORK AT ALL First, when the oven is equipped with timer, check appliance is not programmed to turn on later. If it is, turn to manual setting (i.e. hand symbol). If the button or scale on the timer remains in the automatic position after use, the power supply to the oven will be interrupted. Also, check your appliance is switched on at the mains. Next check for an unexpected power strike by switching on adjacent lights etc. Finally, check fuses and plug wiring.
Warranty FOR SALES IN AUSTRALIA AND NEW ZEALAND APPLIANCE: [FREESTANDING COOKER] This document sets out the terms and conditions of product warranties for Electrolux branded appliances. It is an important document. Please keep it with your proof of purchase documents in a safe place for future reference should you require service for your Electrolux appliance. General Terms and Conditions 1.
