User Guide

5
You will then be asked for your password.
The default password for Administrator is blank (i.e. no characters). Click OK to proceed. Note: it is
strongly recommended that you visit the Settings tab, modify this user (Administrator), and define a
password, fingerprint, or both for future authentication and access to this program.
Overview and Z-Wave Setup Guide
You will then see the Overview screen. When the program is first run, the Z-Wave Setup screen will
display as shown below, overshadowing the Overview screen.
If you have no Z-Wave locks, and do not wish this utility to be run each time you start the MS1, check
the “Do not show Z-Wave Setup Guide at startup” box, and click Next, then Finish in the order shown
below. However, if you have a Sigma Z-Wave USB controller and are working with the RTS-Z series of
locks, select Connect and allow the MS1 application to search USB ports on your PC and associate the
MS1 program with the USB Z-Wave controller stick.