User Guide

30
Using the MS1, select the ‘ Include ’ (plus symbol) button. Again, you will see the waiting for information
message on your MS1 screen.
From the lock’s main menu item “ 7.Zwave ”, select the “ZwaveInclusion” option by using the arrow keys to
scroll to it and then pressing ‘M’ to select it. After a few seconds, you should see “Success” on the lock;
the MS1 will again revert to an idle screen within the ZWave tab .
Using the MS1, notice the “Unbind List” now has a node entry. If it isn’t already, highlight it, and from the
middle of the same screen select a particular lock from the pull-down list to associate this node with.
Click the ‘Bind’ button and you’ll see your pairing entered into the “Bind List”.
The Unbind list shows Nodes that have been detected by the Z-Wave controller and are available for
association with your Locks. The Bind list shows you all the associations that have been created via the
‘Add/Inclusion’ process.