User Guide

29
Please follow the steps to “Include/Add” theRTS-Z and RTS-PZ lock to a Z-Wave network:
Use the MS1, a Z-Wave USB dongle installed
on the same computer as the MS1, and a RTS-
Z lock
Launch the MS1 and use the Z-Wave Setup
Guide which launches automatically to locate
and connect to the attached USB dongle.
Once connected, you will see the message
“Z-Wave Controller is connected”.
Select the Lock tab in the left column. Create a Lock Group and Z-Wave lock(s) within that group. You
may assign your users at a later time.
From the ZWave tab, click on your Lock Group. If this is the first time performing this operation, select the
‘ Reset ’ icon on the top row (mouse-over will show you the icon name). Note: If you have other locks
already associated (via Bind operation), doing this will void those associations.
At this stage, you will either need physical access to the lock or an assistant to concurrently provide
certain menu actions at the lock itself in tandem with your actions using the MS1.
Place the cursor back on the Lock Group, select the ‘ Exclude ’ (minus symbol) button. You will see the
“Controller is waiting for node information” message within the MS1.
Using the lock’s main menu item “ 7.Zwave ”, select the “ZwaveExclusion” option by using the arrow keys
to scroll to it and then pressing ‘ M ’ to select it. After a few seconds, you should see “Success” on the
lock; the MS1 will simply revert to an idle screen within the ZWave tab.