User Guide

27
Z-Wave
a. - Exports lock events to spreadsheet or text file.
b. - Prints lock events.
c. - Print previews lock events.
d. - Deletes selected record(s).
The Z-Wave Button allows the user to perform various Z-Wave functions between the MS1 and their RTS-Z lock or
certain simple functions involving 3
rd
party Z-Wave certified devices (functions such as binary on/off).
Administrators will initially use this menu to create an association between the MS1 Z-Wave control software and
their Z-Wave device, allowing them to “include/add” or “exclude/remove” Z-Wave devices from previously
administered locks. Further, the administrator can then send configuration information such as lock parameters
and user information (fingerprint encoding and PIN information) and retrieve audit information from the
associated lock.
This icon is used to associate the MS1 program with the USB Z-Wave controller stick if not done at MS1 program
launch.
These icons are used to ‘Add’ or ‘Remove’ (‘Include’ or ‘Exclude’ at the Z-Wave device) a Z-Wave device to the MS1
serving as the controller.