Specifications
Table Of Contents
- PowerBook 190/5300 Series
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Introduction
- Before You Begin
- Battery
- Floppy Drive
- I/O Door
- Front Feet
- Rear Feet
- Keyboard
- RAM Card
- Clutch Covers
- PC Switch Board (PCMCIA)
- Display Assembly
- Palm Rest
- Sleep Actuator
- Trackpad
- Hard Drive
- Power Supply Board (5300 Series Only)
- Backup Battery
- Heat Sink
- Video Board (Optional on 190 Series)
- Logic Board
- CPU Stiffener
- Infrared Board (Optional on 190 Series)
- Media Bay LED
- PC Card Door (PCMCIA)
- Video Expansion Cover (Optional on 190 Series)
- Reset Actuator
- Sound-In Cover (190 Series Only)
- Media Bay Release Mechanism
- Display Housing
- Inverter Board
- Display
- Microphone
- Speaker
- Clutches
- Floppy Drive Mechanism
- Upgrades
- Additional Procedures
- Exploded View

Troubleshooting Troubleshooting Flowchart—Startup Problems - 32
Troubleshooting Flowchart—Startup Problems
1. Boot with extensions off.
2. Boot with
Disk Tools
Update Driver
.
3. Replace the hard drive.
4. Replace the logic board.
END
Does
the
PowerBook continue
to boot to the
desktop?
No
Yes
No
Yes
No
Do the
trackpad and
keyboard
function?
1. Reset PRAM.
2. Check the trackpad and
keyboard cables.
3. Replace the trackpad and
keyboard cables.
4. Replace the trackpad.
5. Replace the keyboard.
6. Replace the logic board.
Yes
Does
the flashing
question mark
appear?
1
Go to
Start
Insert a known-good disk
into the floppy disk drive
and try to initialize it.
No
Does the
disk
initialize?
Yes
1. Reset PRAM.
2. Boot from
Disk Tools
.
3. If hard drive appears, reinstall system software.
4. If hard drive doesn't appear,see if
Hard Drive
Format
can reformat it.
5. Replace the hard drive cable.
6. Replace the hard drive.
7. Replace the logic board.
1. Replace the floppy drive cable.
2. Replace the floppy drive.