Specifications
Table Of Contents
- PowerBook 190/5300 Series
- Basics
- Specifications
- Troubleshooting
- Take Apart
- Introduction
- Before You Begin
- Battery
- Floppy Drive
- I/O Door
- Front Feet
- Rear Feet
- Keyboard
- RAM Card
- Clutch Covers
- PC Switch Board (PCMCIA)
- Display Assembly
- Palm Rest
- Sleep Actuator
- Trackpad
- Hard Drive
- Power Supply Board (5300 Series Only)
- Backup Battery
- Heat Sink
- Video Board (Optional on 190 Series)
- Logic Board
- CPU Stiffener
- Infrared Board (Optional on 190 Series)
- Media Bay LED
- PC Card Door (PCMCIA)
- Video Expansion Cover (Optional on 190 Series)
- Reset Actuator
- Sound-In Cover (190 Series Only)
- Media Bay Release Mechanism
- Display Housing
- Inverter Board
- Display
- Microphone
- Speaker
- Clutches
- Floppy Drive Mechanism
- Upgrades
- Additional Procedures
- Exploded View
Take Apart CPU Stiffener - 62
2 Remove the 3 screws
holding the CPU stiffener
to the back of the bottom
case.
3 Free the stiffener from
the infrared and media
bay cables.
4 Remove the CPU
stiffener from the
bottom case.
Replacement Tip: Make
certain that the infrared
board, infrared window,
port EMI shield, and media
bay LED cable are correctly
aligned before tightening
down the CPU stiffener.
CPU
Stiffener
Infrared
Cable
Media Bay
LED Cable
Screw Screw Screw