Installation

14 electrolux.com.au
INSTALLATION (CONTINUED)
5. Rotate slide-bar to lower alignment, mark a line on
cupboard door (Figure 16).
Figure 16
6. Remove slide-bar and draw line to indicate central
alignment (Figure 17).
Figure 17
7. Replace slide-bar and align to centre line marked in
previous operation (Figure 18).
Figure 18
8. Secure slide-bar by driving a cupboard screw into the
centre of the inner slot Fig 19. Gently test closing the
door.
Figure 19
9. If the action is smooth and the slider does not move
in relation to the cupboard door, drive another
cupboard screw into the end slot Fig 20.
Figure 20