User manual



Door Removal
Removing the door from your appliance
• Open door fully.
• Rotate the two stirrups forwards so that they are
engaged together onto the hooks on the hinge arms.
• Hold both stirrups in place and lightly close the door.
The stirrups will now remain engaged.
• Close the door half way and lift it away from the oven.
• Do not lift the door by the handle, use one hand
either side of the door, keeping fingers clear of the
hinge arms.
Replacing the door to your appliance
• Relocate both hinge arms at the same time into the front
housing.
• Ensure that the location notches on the bottom of the
hinge arms are positioned onto the lower cutout lip.
• Close the door partially to ensure that the location
notch drops into place.
• When the hinges are located, open the door fully and
ensure the stirrups are disengaged.
NOTE: Never use force and always ensure that the location
notch is correctly engaged before you operate the door.
CAUTION

CAUTION



WMAN_541_Jun10.indd 25 4/6/10 10:18:34 AM