User manual

1
4
3 Button Electronic Clock
• After the appliance has been electrically connected "12.00"
will be displayed and the "clock indicator" will flash.
• To set the time of day, press the – or + buttons. 5 seconds after
the last change, the "clock indicator" will disappear,
confirming the time has been set.
• Note: The clock has a 24-hour display.
Setting the time
If you have purchased a model fitted with an electronic or programmable timer, you
must set the time of day before you can operate your appliance.
Installing your oven furniture
The type of oven furniture you receive is dependant on the model you have purchased.
1. Side racks
These can be attached to either side in the following
manner.
• Insert the largest peg into rear access hole provided.
See diagram.
• Then locate the front peg into the front access hole
and push in firmly.
2. Shelves and trays
The shelves are designed so that they have maximum travel but cannot be accidentally pulled right
out. The trays are designed the same way and fit straight into the side racks.
• Locate the rear edge of the shelf/tray in
between 2 guide rails of the side rack - see
diagram. Ensure the same rail positions on both
sides of the oven are being engaged.
• With the front edge raised, begin to slide the
shelf into the oven.
• Once the detents have passed the front edge of
the side rack, the shelf can be pushed
completely in.
• When fully inserted the shelf/tray should not
interfere with the closed oven door.
• To insert grill tray in the grill, fully open the grill
drawer and position the tray so that the slots on
the outer edges fit on the tabs on the slides.
• Always remove unnecessary trays or dishes from
oven when roasting or baking.
BEFORE OPERATING YOUR APPLIANCE FOR THE FIRST TIME
SIMPRD 342-1-529 30/1/08 8:51 AM Page 4