User manual

4
USING THE OVEN
13
Setting the timer
1. Press the “mode“ button until the “timer” indicator begins flashing.
2. Set the countdown time you want by using the – and + buttons. 5 seconds after the last change
the “timer” indicator will stop flashing, confirming the timer has been set.
3. To stop the beeper, press any button.
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the
heating source will come on.
3. Press the “mode“ button until the “cook time” indicator begins flashing.
4. Set the cooking duration you want by using the – or + buttons. 5 seconds after the last change,
the “cook time” indicator will stop flashing, and the time of day will be displayed.
Note: Do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. Select the desired oven function and temperature. The oven indicator light will glow and the
heating source will come on.
3. Press the “mode“ button until the “end time” indicator begins flashing.
4. Enter the time of day you want to finish cooking by pressing the – or + buttons. 5 seconds after
the last change, the “end time” indicator will stop flashing and the current time of day will
be displayed.
Setting the delayed start cooking time
1. Program the “cook time“ and “end time“ as described in the relevant sections. Once both the
“cook time“ and “end time“ have been set, the “cook time“ and “end time” indicators will stop
flashing and the current time of day will be displayed.
To check or cancel settings
1. To check your settings, press the mode button until the setting you want is displayed. A red
light will flash next to the mode (cook time, end time etc) that is currently on display.
2. To cancel “delayed start” press the mode button until a light flashes next to “end time”. Press
and hold the – button until the clock no longer reverses (you will hear a beep). If you have left
the temperature and function knobs at a setting the oven will start once the “end time” light
stops flashing.
3. To cancel “auto shut off” press the mode button until a light flashes next to “cook time”. Press
and hold the – button until the clock no longer reverses at (“0:00” and you will hear a beep).
This automatically cancels “delayed start”. If you have left the temperature and function knobs
at a setting, the oven will start once the “cook time” light stops flashing. Because you have
cancelled “auto off” the oven will continue to heat until you manually turn it off.
On completion of cooking
The oven will turn off, the timer will beep and the “end time“ and/or “cook time“ indicators will
flash.
1. Turn the function and temperature controls to the off position.
2. Press any button to stop the timer from beeping.
Switching the clock display ON and OFF
1. Press any two buttons together for 2 seconds to switch ’off’ the display.
2. Press any button to switch the clock display ’on’ again.
Note: If a timer mode is set, then it is not possible to switch the display off.
USING THE OVEN
SIMPRD 342-1-529 30/1/08 8:51 AM Page 13