USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LTV-19w6 Widescreen LCD TV TV LCD à Écran Géant TV LCD Pantalla Grande www.westinghousedigital.
Table of Contents IMPORTANT PRODUCT SAFETY INSTRUCTIONS ......................................................................................2 Antenna Installation Safety ...................................................................................................................................4 Cleaning the LCD TV ...........................................................................................................................................4 Safety Guidelines ............................
IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your television. Failure to follow warnings can result in personal injury or damage to product. Keep this User’s Manual in a convenient location for future reference. Proper Positioning of Television Always handle your LCD television with care. Avoid touching the LCD screen. Skin oils are difficult to remove.
To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution: Never remove the rear cover. There are no user serviceable parts inside. Your LCD TV contains high-voltage parts. You may be seriously injured if you touch them. Do not attempt repairs yourself.
Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded so as to prevent voltage surges and built-up static charges.
Safety Guidelines Warning: This device must be operated with the original power supply. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. Some examples are listed below: USA...............…UL Switzerland……SEV Canada.............CSA Britain ...........…BASE/BS Germany……….VDE Japan ...............
Installation Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb WSXGA+ computer monitor —making it a practical solution for tight spaces in the office, bedroom, or kitchen. Watch television, play video games, e-mail, or surf the Internet.
2. Attach Base Stand to LCD TV Attach the base stand to the LCD TV stand neck. Align the holes and tabs, press and snap the base stand into place. Detachable Base Stand To detach the base stand, just press on the locking tabs on the bottom of the base stand and remove the base stand from the stand neck.
3. Connect Antenna, Video, S-Video, YPbPr, DVI, and VGA Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV.
Note: The Audio-L and Audio-R (Audio L/R) inputs are shared between YPbPr, S-Video, and Video source input connectors. Connecting a computer to the LCD TV: IMPORTANT: Before you begin, make sure the computer and TV are turned off. Connect a D-Sub (VGA) or DVI cable and an audio cable to the back of the LCD TV. D-Sub CONNECTION: Connect an analog D-Sub (VGA) cable from your computer VGA port to the D-Sub input connection. Connect a 3.
4. Connect Power Cable Connect the power cord to the back of the LCD TV and then into a properly grounded AC outlet. 5. Turn Power On Press the power button on the right side of the LCD TV or on the remote control to turn on the TV.
6. Programming TV Channels 1. Select TV as the source input using the Source button on the remote control. 2. Press the Menu button to display the OSD Display Menu. 3. Use the CH▲/▼arrow keys to highlight the TV Menu. 4. Using the Vol ► arrow keys select the TV sub-menu. Use the ▼ to highlight the CH Auto Scan function. Press Vol ► arrow key and Channel Auto Scan will be performed. 5. Once the CH Auto Scan is complete, switch channels by using the CH ▲/▼ arrow keys on the remote. 6.
Controls & Connections This section describes the keypad panel controls, and remote control in more detail. Front View of the Product Use the buttons on the right side keypad control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the next page and are defined in the “OSD Functions” section.
Side Keypad Controls 1 2 3 4 5 6 Button Mode TV Source OSD Menu 1 CH+ Channel up Navigate up 2 CH- Channel down Navigate down 3 Vol- Volume down Decrease value 4 Vol+ Volume up Increase value 5 6 Press and hold for 2 seconds to Menu/Source access the OSD menu. Press and release to change source.
Remote Control 1. Mute Turn audio on and off. 2. MTS (Multi-channel TV Sound) Stereo, Mono and SAP sound selection 1 3. Power 2 Switch the power on and off. 4. Sleep 5 Automatically turn off the TV after a set time. 6 5. Display Display the channel information. 7 6. PIP Available in D-Sub/DVI Modes; to turn PIP picture on & off and select PIP picture size. 8 7. PIP Menu 10 Used to navigate through the PIP OSD menu and control audio swap. 11 8. Return Recall the previous channel. 9.
OSD Functions This section describes each on-screen display (OSD) command. There are different OSD menus depending on whether you are in TV, Video (Video/S-Video/YPbPr) or PC (D-Sub/DVI) mode. All the function settings for your LCD TV are controlled either via the remote control or using the control keys located on the right side of the LCD TV. To display the OSD main menu, press and hold the Menu button on the control keys or the MENU key on the remote control.
Audio Menu In the Audio Menu use the Vol► button to select the Audio sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu.
TV Menu In the TV Menu, use the Vol► button to select the TV sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Tuner System CH. Auto Scan CH. Fine Tune Blue Screen CH. No CH. Edit C.C. Explanation Select between STD, HRC, IRC, Air (Depending on your local area) Start to scan channel after pressing right or left key, and stop scan if any key is pressed.
Function Name Language OSD Transparency OSD Time-out OSD Position Reset Sleep Aspect Ratio Explanation English, Chinese, French, Spanish Set OSD transparency level Set the time to turn off the OSD automatically OSD horizontal/vertical position adjustment Restore factory default settings Set the Sleep timer for 30, 45, 60, 90, or 120 minutes Set the display to Full, Normal, or Zoom (Can only change with an active signal) V-Chip and Parental Control Menu To access the PARENTAL CONTROL menu press the V-Chip
Rating Menus Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the PIN code. Use the ▼ button to highlight the Movie (MPAA) or TV (TVPG) menu. Use the ► button to select the sub-menu. Use the ▲/▼ buttons to highlight the Movie/TV Rating to be blocked or un-blocked. Press the MENU button to lock and unlock the highlighted rating. Press EXIT to exit the V-chip menu.
PC OSD Menu Image Menu In the Image Menu use the Vol► button to select image sub-menu. Use the CH▲/▼ buttons to highlight function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Brightness Contrast Sharpness Clock Phase H-POSITION V-POSITION Auto-Config Explanation Brightness adjustment. Default value is 100. Contrast adjustment. Default value is 50. Adjust picture sharpness from 1 – 5. Default value is 2. Adjust the Clock timing. Default value is 50.
Audio Menu In the Audio Menu use the Vol► button to select the Audio sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. Function Name Volume Mute Treble Bass Balance Explanation Volume adjustment Turn Audio Off and On Treble adjustment Bass adjustment Left to Right Audio adjustment Color Temp Menu In the Color Temperature Menu, use the Vol► button to select Color Temp sub-menu.
Miscellaneous Menu In the Miscellaneous Menu, use the Vol► button to select the “Misc” sub-menu. Use the CH▲/▼ buttons to highlight the function. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu.
PIP Function Menu Picture In Picture (PIP) is available in D-Sub, DVI, modes only. Use the Vol► button to select the PIP Function sub-menu. Use either the ▲/▼ arrow keys to navigate within the menu. Then use the Vol◄/► arrow keys to change the values of the function in the OSD menu. The Exit button on the remote control will allow you to back out of the OSD menu.
Input Source not found or Out of Range If there is no source connected to the Input selected (TV, Video, S-Video, YPbPr, DVI, or D-Sub), the following will be displayed: If the signal source is DVI or D-Sub mode and the Display settings are not compatible with, or are out of range of the LCD TV, the following will be displayed: 24
Appendix Specifications Preliminary Product Specification Panel Size/Type 19” wide screen Color TFT LCD. Anti-static and hard coated. Native/Optimum Resolution 1440 x 900 Aspect Ratio 16:10 Viewing Angle Horizontal: 150° Vertical: 130° (typical) Display Colors 16.2 million colors Active Display Area 16.07” (H) x 10.
Troubleshooting No power • • • Make sure AC cord is plugged into the back of the LCD TV. Make sure AC power cord is securely connected to the AC socket. Plug another electrical device (like a radio) to the power outlet to verify that the outlet is supplying the proper voltage. Power is ON but no screen image • • Adjust brightness and contrast. Check Source settings.
USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LTV-19w6 Widescreen LCD TV TV LCD à Écran Géant TV LCD Pantalla Grande www.westinghousedigital.
