Instruction manual

2
Step3 Check motor rotation without load.
 Press RUN Key. 7-segment Display will indicates 00.0to 05.0. Such value is the frequency
output value.
 Check the operation direction of the motor.
IF the direction of the motor is incorrect:
Press STOP Key, turn off the AC power supply. After Power indicator LED is off,
change over theT1 and T2.
Supply the power again, then check the motor direction.
 Press STOP key.
Step4 Check full speed at 50Hz/60Hz
 Change the frequency with 

,

 arrow mark , please press DATA/ENTER after setting
frequency.
 Set frequency to 50Hz/60Hz according to the above regulations.
 Press RUN Key, inspect the motor operation as motor accelerates to full load.
 Press STOP Key, inspect the motor operation as motor deceleration.