User manual

8
Red light: charging+ Blue light: standby can appear purple, this is normal as they are in the same window.
3. Appendix
3.1 Specification
Display 1.5″TFT (480×240 pixels)
GPS Module GPS LOGGER
Memory Micro SD card (SDHC up to 32 G)
Lens Fixed Focus wide angle lens (120°)
ISO Auto
Still images
Format: JPEG(EXIF2.2), DCF
Image resolution: 0.9M, 2M, 3M(software), 4M(software)
Videos
Format: H.264 (MOV)
Resolution: 1920×1080 30fps, 1440×1080 30fps, 1280×720 30fps
Zoom
Video: 4X Digital Zooming(1440*1080P)
Playback still image: Digital Zoom 8X (Maximum)
Audio Built-in microphone/ speaker
Exposure compensation -2.0EV~+2.0EV
Loop Recording OFF, 1 MIN, 3 MIN, 5 MIN
Auto Power Off OFF, 1 MIN, 3 MIN, 5 MIN
Auto power off screen OFF, 1 MIN, 3 MIN, 5 MIN
PC Interface USB2.0 (High-speed)
Output HDMI , Audio-Video output
AV Output Format NTSC/PAL
Battery Built-in polymer battery 3.7V
3.2 Troubleshooting
Question Possible reasons Solutions
The camcorder is suddenly
turned off
Auto Off Function is On.
Low battery
Turn on again the recorder
Charge battery
Captured images are not
saved into memory
Power is off before the
images are saved.
Charge battery
Memory card cannot be
used
Memory card is protected.
Memory card contains
non-DCF images from other
cameras.
Unlock the memory card.
Format the memory card. Before
formatting, make sure to backup files
first.
All the buttons are invalid. Short-circuit when
connecting camcorder with
other equipments.
Long press the power button 9-10
seconds to re-boot