User manual

6
2.7 Connecting PC
Connect the DVR to your computer with USB cable included. (Effective only with recording set to off)
When the DVR is connected with PC, it appears as a removable disk in the Windows explorer/ My computer.
The DVR screen turns Blue in USB mode, This is normal.
2.8 Connecting the DVR to Standard TV. (Effective with AV-OUT function)
Connect your recorder and Standard TV via Accessory AV cables.
2.9 Connecting the DVR to HDTV
When connecting to HDTV, you can use high resolution to display video files or pictures.
Use HDMI cable to connect the camcorder video or audio signal to HDTV.
Attention：
：：
：
When connected to HDTV, shuttering, recording and taping are not available!
2.10 Recording Mode
This mode is for recording a video or tacking picture file. The files are saved into TF card.
2.11 Icons meanings
Indication of each icon and symbol, see the table below.
Video Mode
Battery & charge state
TF Card (micro SD) Motion Detection
V:-------
Car speed monitor
after GPS has found
the satellite
White Balance Auto, Tungsten,
Fluorescent, Daylight, Cloudy
indictor
FULL HD Resolution 2013/01/01
01: 08AM
Date and Time
Segmented loop
recording time 1,3,5
GPS active.
2.12 File Protection
2.12.1 When reviewing the video,
 Long press "Down" button and into Movie reviewing to display the latest video files on the LCD screen.
 Then long presses "up" button you can move to protect file button then setup protect one file or all,
etc. The file with are protected.
 Press "OK" button to confirm.
 Long press "Down" button twice to get back to other mode.
2.12.2 When recording (SOS)
Press DOWN button and the current file will be saved and locked and cannot be deleted.
When you copy the video to another memory or HDD, the copied file will still be locked.
Attention: To unlock the files, repeat the steps above. After being unlocked, no files are marked with
a lock
mark
;
under
Loop record setting,
the previous file is not protected,
protects only the last cycle