Installation Instructions

14
Maintenance
REPLACING FILTERS
When lters need replacing, exchange with similar. Also replace
lters that are damaged with punctures, bends, or broken
frames.
- Turn off the range hood and disconnect the power.
- Replace with an equivalent lter, then reconnect the
power.
REPLACING LIGHT BULBS
When light bulbs burn out, replace them with a 5W GU10 base
light bulb.
- Turn off the range hood, disconnect it from its power
source, and ensure that the lights are cool.
- Turn the bulb (1) in the direction indicated and pull it out
to remove it.
- Push in the new bulb (2) and turn it in the direction
indicated until it locks into the socket. Do not release
the bulb until you are sure the bulb has been securely
installed. Then reconnect the power.
- If new bulbs do not operate, ensure that they are
inserted correctly.
DANGER: Turn off the power circuit breaker or the power
switch on the junction box before performing maintenance.
Touching circuitry inside the range hood while it is energized
will result in death or serious injury.
WARNING: Failure to replace worn out or damaged lters
will increase the risk of re.
WARNING: Light bulbs can become hot when turned on.
Do not touch bulbs until they are switched off and cooled.
Touching hot bulbs could cause serious burns.
1
2