Installation Sheet

ManualsBrandsWestinghouse ManualsWestinghouse Shop AllWestinghouse 46" Wide Steel Wire Guard for Westinghouse 63636 and 63637 High Bays

Highbay Installation Instruction

Please read the instructions before installation.

NOTES:

1. Disconnect power before installing.

2. Luminaire not designed with parts which may be replaced or serviced.

3. Suitable for damp location.

4. Suitable for operation in locations with ambient temperatures not exceeding 40°c.

5. Caution – Risk of shock.

6. The Installation must be carried out by a qualified electrician.

ESF-WH-0531

Made in China

ESF-WH-0532

Sensor Installation

Max number of fixtures you can connect to one sensor

ESF-WH-0533

1. Remove the nut and washer from the sensor.

3. Loosen the screws and open the junction box, then

remove the knockout.

4. Insert the sensor into the knockout.

5. Connect wires as shown below. 6. Reattach the cover to the junction box, ensure the

cover and sensor are secured with screws, installation

is completed.

2. Install the mounting kit on the sensor, and secure

with nut and washer.

Chain Installation

1.Assemble the chain as shown below.

2.Insert the hooks into the slotted holes,

as shown below.

Chain

3.Attach the chain to the ceiling anchors.

5.Insert the terminal cap and wires into

the driver housing.

6.Attach the wire assembly to the

Terminal cap

driver housing. Installation completed.

TURN OFF POWER, and make wiring connections

to the terminal cap (see wiring diagram below).

BLACK(LINE)

WHITE(NEUTRAL)

GREEN(GRD)

PURPLE(DIM+)

GREY(DIM-)

DIM+

DIM-

Model #

63634

63635

63636

63637

Description

110W 2' LED Dim Linear High Bay

160W 2' LED Dim Linear High Bay

160W 4' LED Dim Linear High Bay

225W 4' LED Dim Linear High Bay

One sensor connected Max Qty of fixture

3pcs

2pcs

1pc

Merrytek sensor - MC031V D

Summary of content (3 pages)

PAGE 1
® Chain Installation Sensor Installation 2.Insert the hooks into the slotted holes, as shown below. 1.Assemble the chain as shown below. 1. Remove the nut and washer from the sensor. 2. Install the mounting kit on the sensor, and secure with nut and washer. Highbay Installation Instruction Chain L N BLACK(LINE) WHITE(NEUTRAL) GREEN(GRD) PURPLE(DIM+) GREY(DIM-) DIM+ DIM- 5. Connect wires as shown below. 6.
PAGE 2
® Instalacion de la Cadena Instalacion del Sensor 2.Inserta los ganchos en los agujeros ranurados, Como se muestra abajo. 1.Instala la cadena como se muestra abajo. Negro Blanco L N Verde Violeta Gris DIM+ DIM- Hecho en China 4 ESF-WH-053 4. Inserta el sensor en el agujero ciego. 5. Conecte los cables como se muestra abajo. 6. Vuelva a colocar la tapa en la caja de conexiones, asegúrese de la tapa y el sensor están asegurados con tornillos, instalación esta completado. HB Terminal cap 6.
PAGE 3
® Installation de chaîne Installation de capteur 2.Insérez les crochets dans les orifices fendus comme illustré à la suite. 1.Assemblez la chaîne comme illustré à la suite. 1. Retirez l'écrou et la rondelle du capteur. 2. Installez le kit de montage sur le capteur et fixez avec l'écrou et la rondelle. Instructions d'installation de Highbay Chaîne 3. Desserrez les vis et ouvrez le bornier puis retirez la découpe. 4. Insérez le capteur dans la découpe. 5. Connectez les fils comme illustré à la suite.