Instruction manual

6 7
ETL-ES-Brentford-WH14 ETL-ES-Brentford-WH14
Unpack and inspect fan carefully to be certain all contents are included.
Turn off power at fuse box to avoid possible electrical shock.
1
Use metal outlet box suitable for fan support (must support 35 lbs).
Before attaching fan to outlet box, ensure the outlet box is securely
fastened by at least two points to a structural ceiling member (a loose
box will cause the fan to wobble).
2
PREPARING FOR INSTALLATION
ANTES DE LA INSTALACIÓN
Quite el envoltorio e inspeccione detenidamente el ventilador para verificar
que todas las piezas estén incluidas. Apague la alimentación en la caja de
fusibles para evitar la posibilidad de descarga eléctrica.
Use una caja de embutir de metal adecuada para soportar un ventilador
(debe soportar 35 libras). Antes de fijar el ventilador a la caja de embutir
asegúrese de que la misma esté fijada de manera segura en por lo menos
dos puntos a un miembro estructural del cielo raso (una caja suelta haría
que el ventilador oscile).
MOUNTING BRACKET INSTALLATION
INSTALACIÓN CON SOPORTE
DE MONTAJE
Instale el soporte de montaje (1) a la caja eléctrica del techo usando los tornillos
y arandelas suministrados con la caja eléctrica.
3
1
Install mounting bracket (1) to outlet box in ceiling using the screws and
washers provided with the outlet box.
Quite el pasador tipo prensa (1) desde el pasador transversal (2) de la vara (3).
4
Remove clamp pin (1) and cross pin (2) from downrod (3).
1
2
3