USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LVM-42w2 HD Video Monitor Moniteur Vidéo HD Monitor de Video de Alta Definición www.westinghousedigital.
Contents INSTALLATION Package Contents……………………………….……………………….6 Front View of the HD Video Monitor……………..……………………. 7 Rear View of the HD Video Monitor……………….………..…………. 7 Side View of the HD Video Monitor…..……………………...…………8 Remote Control…………………..…………………………..………… 10 Installation………….…………………………………………………….11 OSD Functions PICTURE PARAMETERS: Brightness / Contrast / Saturation / Hue / Color Temp / Sharpness / Aspect Ratio / Backlight / Reset……………………..…... .
English 1
Important Product Safety Instructions Overloading Do not overload wall outlets, extension cords, or power strips. This can result in fire or electronic shock. Power Cord Protection Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords and each end of the cords for damage. The HD Monitor shall be installed near a wall socket outlet and the plug on power cord shall be readily accessible.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use the HD Monitor near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9) Do not attempt to bypass the safety purpose of the polarized or grounding- type plug.
Safety Guidelines IMPORTANT NOTICE CONCERNING POWER CORD SELECTION The specific power cord for this HD Monitor is enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed.
Cleaning the HD Video Monitor MAKE SURE THE HD Monitor IS TURNED OFF NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE To clean the screen: 1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles. 2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen. To clean the case: 1. Use a soft, dry cloth. 2.
INSTALLATION English Package Contents Your product package includes: • 42” Westinghouse HD Video Monitor • Remote Control (with batteries) • Power Cord • Quick Connect Guide • User’s Manual • Warranty Card 6
Front View of the HD Video Monitor “IR” receiver and LED indicator Speakers Rear View of the HD Video Monitor 7 English Use the buttons on the right side of the HD Monitor or on the remote control to display the On Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 12.
Side View of the HD Video Monitor English 1. Menu Turn OSD Menu ON/OFF 2. Volume + / - Increase/Decrease sound volume or adjust a highlighted control while in the OSD Menu. 3. OSD Selection T/S Highlight a control while in the OSD Menu. 4. Input Select Active Video Input or choose a selection while in the OSD MENU. 5.
Side View of the HD Video Monitor 6. AV Video Input Connect to an external video device such as a VHS player or video game system. 7. AV & S-Video Audio Input (Right / Left) Connect an external audio source to this jack; (Audio (R/L). This connection supports either S-Video or AV input. 8. Audio Output (Right / Left) Connect this output to an external stereo audio amplifier, receiver or surround sound processor. 9. VGA Audio IN Using the cable provided, connect to the Audio out (Green) from a computer. 10.
Remote Control The Remote Control will transmit to the HD Monitor up to 10 feet away. 10 English 1. POWER: Switch the power On/Off 2. INPUT Select input source 3. OSD SUB-MENU SELECTION Select OSD sub-menu option directly 4. PREVIOUS OSD MENU Select previous OSD menu 5. MENU/EXIT Turn OSD Menu On/Off. 6. SCALING Select Video Display format “STANDARD” or “FILL” 7. T / S / W / X OSD MENU control 8. Enter Execute a command 9. MUTE Turn the Sound On/Off 10. INFO Display the source and channel information 11.
Installation 1. Insert Remote Control Batteries 3) Re-attach the battery cover. CAUTION: z z z z z z Only use AAA batteries. Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury. Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a fire risk or lead to personal injury. Dispose of used batteries in accordance with local laws and regulations.
2. Connect audio and video cables from a PC Connect one or all of the following into the back of the HD Monitor VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to the HD Monitor VGA IN port. DVI1/DVI2 CONNECTION: Connect a Digital DVI cable from your PC DVI OUT port to one of the HD Monitor DVI-HDCP port. AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port to the AUDIO IN port on the HD Monitor. 3.
4. Connect power cables Connect the power cord to the HD Monitor then to a properly grounded AC outlet. English 5. Turn Power On Press the Power ON button on the right side of the HD Monitor, or press the Power ON (Red) button on the remote control. 6. Select input source for the HD Monitor using the OSD menu or remote control 7.
OSD Function To display the OSD main menu, press the Menu button on the right side of front control keys of the HD Monitor or the MENU key on the remote control. Use 3/4 arrow keys to highlight the desired OSD sub-menu. Main Menu To select a sub-menu, press ▲/▼ on the right side of the HD Monitor or the ▲/▼ key on the remote control. Also, by using the number keys on the remote control, you can select a OSD sub-menu directly.
PICTURE PARAMETERS: English Function Name Brightness Contrast Saturation Hue Color Temp Function Aspect Ratio Brightness adjustment Contrast adjustment Saturation adjustment Hue adjustment Color temperature adjustment (Color 1, Color 2, Color 3) Sharpness adjustment (Sharpness cannot be adjusted in PC mode) Set display to “STANDARD” / “FILL” Backlight Backlight adjustment Reset Reset video settings Sharpness 15
PC PARAMETERS: English Function Name Auto Adjust Clock Phase Position Function Automatically adjust the horizontal phase of the image Clock adjustment Phase adjustment Adjust the horizontal and vertical position of the image NOTE: The GRAPHIC menu is only available when VGA source is selected.
AUDIO SETTINGS: English Function Name Volume Bass Treble Balance Mute Speaker Reset Function Volume adjustment Bass adjustment Treble adjustment Balance adjustment Select Audio OFF or ON Select internal or external speaker Reset audio settings 17
PICTURE-IN-PICTURE: English Function Name Display Mode Main Source Function OFF --> PIP --> PBP --> POP Select main screen sources VGA --> DVI1--> DVI2 --> AV --> S-Video--> YPbPr1 --> YPbPr2 --> HDMI PIP Source Select sub screen sources Please see PIP/PBP/POP specification in Table 1 Swap main screen and sub-screen source Sub-screen display horizontal/vertical position adjustment Sub-screen display size adjustment (Small -->Medium --> Large) Select main screen or sub-screen audio sources Swap PIP Pos
GENERAL SETTINGS: English Function Name Menu Position Menu Timeout Language Sleep Timer Transparency DPMS LED System Info Factory Reset Function OSD horizontal/vertical position adjustment Set the time to turn off the OSD automatically OSD language selection Set sleep timer to turn off the power automatically Set OSD transparency level Select DPMS On/Off Turn the LED ON or OFF Display Input source, type and signal Restore factory default settings 19
Specifications Type 42(42.02wable diagonal area), TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1920*1080 vertical stripe Color Anti-reflective coating + Anti-glare coating 176° (H) / 176° (V) Viewing Angles Output Signal RGB Analog * 1 (75 ohms, 0.
Troubleshooting No Power Make sure power button is ON (White LED). Make sure AC power cord is securely connected to the AC socket. Plug another electrical device (such as a radio) to the power outlet to verify that the outlet is supplying the proper voltage. AUDIO Interconnection Issues • Remember that S-Video and Composite (AV) share the same audio source.
USER’S MANUAL MANUEL DE L’UTILISATEUR MANUAL DEL USUARIO LVM-42w2 HD Video Monitor Moniteur Vidéo HD Monitor de Video de Alta Definición www.westinghousedigital.
