User Guide

Item checklist
Please check if the following items are completed
① The supporting components for base (has been assembled);
② Four black zinc-plated mechanical screws with mat;
Note: There could be a small difference in appearance among different models in the same series.
The actual product shall prevail
Installation Steps:
1. Take out the TV set, the base/stand and accessories from the carton.
2. Pull out the lip covering the hole of base/stand smoothly(Fig.1).
3. I
nsert the base/stand into the hole with the guide of the arrow mark beside the hole(Fig.2).
4. Align the screw holes on TV set back cover and the base/stand, then tighten the screws(Fig.3).
Fig.1
Plastic stand lip
Screw
Fig.3
Fig.2