Battery User Manual

7
CHARGER OPERATION
CHARGING A HOT BATTERY PACK
When using a tool continuously, the battery pack may become hot. A hot battery pack may be
placed directly onto the charger port but charging will not begin until the battery temperature cools
to within acceptable temperature range. When a hot battery pack is placed on the charger, the green
LED will turn on and the red LED will be o. Remove the battery for 30 minutes and allow to cool
then place back on charger.
CHARGING A COLD BATTERY PACK
A cold battery pack may be placed directly onto the charger port but charging will not begin until
the battery temperature warms to within acceptable temperature range. When a cold battery pack is
placed on the charger, the green LED will turn on and the red LED will be o. When the battery pack
warms the charger will automatically begin charging.
LED FUNCTIONS
BATTERY PACK GREEN
LED
RED LED ACTION
GREEN
LIGHT
RED
LIGHT
Without battery pack ON -
SOLID
OFF Ready to charge the battery pack.
With battery pack ON -
SOLID
OFF Remove battery.
NOTICE: If fuel gauge on battery is not full
then the battery is too hot to charge, let bat-
tery cool for 30 min and charge again.
GREEN
LIGHT
RED
LIGHT
With battery pack OFF ON -
SOLID
Battery is charging.