Replacement Part List
Westinghouse Portable Power | 9
CAUTION
Always have assistance when lifting
the generator. The generator is heavy;
lifting it could cause bodily harm.
Avoid cutting on or near staples
to prevent personal injury.
Tools required – box cutter or similar device.
1. Carefully cut the packing tape on top of the carton.
2. Fold back top aps to reveal the manual.
3. Remove the Wheel Kit Accessories cardboard box.
4. Carefully cut two sides of the carton to
remove the generator.
WHEEL KIT ACCESSORIES BOX
Open the Wheel Kit Accessories box and verify the
contents against the list below. If any parts are missing,
please locate an authorized Westinghouse Generator
dealer at service@wpowereq.com or call
1-855-944-3571.
WGen2000 Components:
Tool Bag (1)
Spark Plug Socket Wrench (1)
0.6 Liter Bottle of SAE 10W30 Oil (1)
Oil Funnel (1)
WGen3600 Components:
Wheels (2)
Tool Bag (1)
Spark Plug Socket Wrench (1)
0.6 Liter Bottle of SAE 10W30 Oil (1)
Mounting Foot (2)
Oil Funnel (1)
WGen5500, WGen7500, WGen6500st
& WGen8300st Components:
Wheels (2)
Tool Bag (1)
Spark Plug Socket Wrench (1)
1.1 Liter Bottle of SAE 10W30 Oil (1)
Mounting Foot (2)
Oil Funnel (1)
UNPACKING
Figure 1 -Wheel and Feet Kit Hardware
1
2
3
4
5
1. Washer (2 used)
2. Flange Bolt M8 x16mm (4 used)
3. Locking Flange Nut M8 (4 used)
4. Hairpin Cotter Pin (2 used)
5. Wheel Axle Pin
WGen3600: 16 mm x 95mm (2 used)
WGen5500-8300 16 mm x 100mm (2used)