User Manual
Westinghouse Portable Power | 9
CONTROL PANEL FEATURES IGEN2200
120-Volt, 20-Amp Duplex Outlet (NEMA 5-20R): The
outlet is capable of carrying a maximum of 20 amps.
USB Duplex: 5V DC that come in 1 amps and 2.1
amps.
Reset Breaker: If the inverter is overloaded, the reset
breaker will trip. The engine will continue to run, but
there will be no output from the inverter. Unplug the
devices and reduce the load. Push in the reset breaker
to reset it.
Eciency Mode Switch: When turned to the ON
position, the engine will sense the load needed and run
at a slower RPM to save fuel.
Ground Terminal: The ground terminal is used to
externally ground the inverter.
Low Oil LED: Indicates low oil level.
Overload LED: Indicates that the inverter is
overloaded.
Output Ready LED: Indicates the inverter is ready
to be used.
1
2
3
4
5
6
7
8
9
Engine Control Switch: Turn position to CHOKE to start
the engine, and turn to RUN position once the engine is
running. Switch to OFF to stop inverter.
1
2
3
9
4
5
7
8
6
FEATURES
CONTROL PANEL FEATURES IGEN2500
120-Volt, 20-Amp Duplex Outlet (NEMA 5-20R): The
outlet is capable of carrying a maximum of 20 amps.
USB Duplex: 5V DC that come in 1 amps and 2.1 amps.
Reset Breaker: If the inverter is overloaded, the reset breaker will trip.
The engine will continue to run, but there will be no output from the
inverter. Unplug the devices and reduce the load. Push in the reset
breaker to reset it.
Eciency Mode Switch: When turned to the ON position, the engine
will sense the load needed and run at a slower RPM to save fuel.
Ground Terminal: The ground terminal is used to externally ground
the inverter.
Engine Control Switch: Turn position to CHOKE to start the engine,
and turn to RUN position once the engine is running. Switch to OFF to
stop inverter.
LED Data Center: Indicates low oil, overload and output ready.
Displays fuel level, power output, remaining run time, voltage. See
more information on the next page.
1
2
3
4
5
6
7
1
2
3
6
4
7
5