Owners manual

1
Westin Automotive Products, Inc.
320 Covina Blvd
San Dimas, Ca. 91773
Thank You for choosing Westin products
For Additional installation assistance please call
Customer service [phone]
www.westinautomotive.com
P.N.: 75-0991-Rev B
ECO #: W13-0036
DATE: 5/3/2013
APPLICATION: HDX GRILLE GUARDS
APP PART # 57-0000 / 57-0005
LIGHT MOUNT TAB
ITEM QUANTITY DESCRIPTION TOOLS NEEDED
1 2 CLAMP - TOP 13MM SOCKET
2 2 CLAMP - BOTTOM 13MM WRENCH
3 2 M8 X 25MM LENGTH CAP SCREW
4 2 M8 FLAT WASHER
5 2 M8 SERRATED FLANGE NUT
INSTRUCTIONS—INSTRUCCIONES—CONSIGNES
AUTOMOTIVE PRODUCTS, INC.
1. Remove contents from box, verify if all parts listed are present and free from damage. Carefully read and understand all instruc-
tions before attempting installation.
2. This light clamp is attached on the top tab through the grille guard screen. The M8 Fasteners are used to secure the tab to the
screen.
3. The clamp can then be tightened using the fastener that comes with the auxiliary lamp.
4. Figure 4 shows a typical installation of the light mounts. Configuration will vary by the grille guard design.
ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING
FIG 1 FIG 2
FIG 3 FIG 4