Owners manual

ManualsBrandsWestin ManualsAutomotive45-3680 Sportsman 1-Piece Grille Guard Fits 14-15 Silverado 1500

Westin Automotive Products, Inc.

320 Covina Blvd

San Dimas, Ca. 91773

Thank You for choosing Westin products

For Additional installation assistance please call

Customer service (800) 793-7846

www.westinautomotive.com

P.N.: 75-3014 RevB

ECO #: W14-0025

DATE: 6/20/14

APPLICATION: CHEVY SILVERADO 1500 HDX & SPORTSMAN GRILLE GUARDS

(2014 & UP) APPLICATION PART #’S 57-3680, 57-3685, 40-3685, 45-3680

ITEM QUANTITY DESCRIPTION TOOLS NEEDED

1 1 GRILLE GUARD ASSEMBLY RATCHET

2,3 2 LOWER MOUNTING BRACKETS (DRV & PASS) SCREWDRIVER

4,5 2 LOWER SUPPORT BRACKETS (DRV & PASS) 15MM WRENCH

6,7 2 UPPER SUPPORT BRACKETS (DRV & PASS) 15MM SOCKET

8 2 M12 NUTPLATE (YELLOW ZINC) ALLEN WRENCH

9 2 M12 STUD (YELLOW ZINC) 18MM WRENCH

10 2 M12 THICK WASHER (YELLOW ZINC) 18MM SOCKET

11 2 M12 WIDE WASHER (YELLOW ZINC) 10MM SOCKET

12 2 M12 LOCK WASHER (YELLOW ZINC) 7MM SOCKET

13 2 M12 HEX NUT (YELLOW ZINC) 16MM SOCKET

14 2 M12 POLY BOLT RETAINER 16MM WRENCH

15 8 M12 HEX HEAD BOLT (STAINLESS) RATCHET EXT.

16 8 M12 LOCK WASHER (STAINLESS) TORQUE WRENCH

17 16 M12 FLAT WASHER (STAINLESS) UTILITY KNIFE

18 8 M12 HEX NUT (STAINLESS)

19 2 M10 BUTTON HEAD BOLT (STAINLESS)

20 4 M10 FLAT WASHER (STAINLESS)

21 2 M10 LOCK WASHER (STAINLESS)

22 2 M10 HEX NUT (STAINLESS)

INSTRUCTIONS—INSTRUCCIONES—CONSIGNES

AUTOMOTIVE PRODUCTS, INC.

1. Remove contents from box, verify if all parts listed are present and free from damage. Carefully read and understand all instruc-

tions before attempting installation.

2. Remove the front grille and filler panel from the front of the vehicle (Figures 1 - 6).

ANTI-SEIZE LUBRICANT MUST BE USED ON ALL STAINLESS STEEL FASTENERS TO PREVENT THREAD DAMAGE AND GALLING

Pull up all fasteners and re-

move plastic radiator cover.

Fig. 1

Fig. 2

Remove the two fasteners

on each side attaching the

filler panel to the body.

Summary of content (5 pages)

PAGE 1
INSTRUCTIONS—INSTRUCCIONES—CONSIGNES APPLICATION: CHEVY SILVERADO 1500 HDX & SPORTSMAN GRILLE GUARDS (2014 & UP) APPLICATION PART #’S 57-3680, 57-3685, 40-3685, 45-3680 AUTOMOTIVE PRODUCTS, INC.
PAGE 2
Working from beneath the vehicle use a flathead screwdriver to pop loose the plastic tabs retaining the filler panel to the grille. Remove all of the lower screws holding the grille to the radiator support. Fig. 3 Fig. 4 Once all fasteners have been removed and the tabs are popped loose carefully pull the filler panel off of the vehicle. Fig. 5 Fig. 6 Remove all of upper the screws holding the grille to the upper radiator support and carefully pull it from the vehicle.
PAGE 3
7. Re-install the grille and filler panel in the reverse order that they were removed. 8. From beneath the vehicle slip the supplied M12 nutplates into the large holes in the bottom of the frame as shown (Figure 9). Make sure the flat portion of the nutplate is on the bottom of the frame and center the threaded portion in the middle of the hole. 9. Assemble the thick M12 washer and poly washer on the M12 stud (Figure 10). Partially thread the assembly into the nutplate previously placed inside the frame.
PAGE 4
Loosely attach the Upper Support Strap to the Grille Guard using supplied M10 hardware. Fig. 13 Fig. 14 Loosely install the Grille Guard to the lower mounting brackets using the provided M12 hardware. (Pass Side Shown) 13. Align and adjust the Grille Guard as necessary. Tighten all remaining hardware; M10 to 30-35 ft-lbs., M12 to 50-55 ft-lbs. 14. For the 57-3680 HDX Grille Guard, headlight glare may exist from light reflecting off the wings.
PAGE 5
SPORTSMAN GRILLE GUARD EXPLODED VIEW (HDX SIMILAR) Westin Automotive Products, Inc. 320 Covina Blvd San Dimas, Ca. 91773 P.N.: 75-3014 RevB ECO #: W14-0025 5 Thank You for choosing Westin products For Additional installation assistance please call Customer service (800) 793-7846 www.westinautomotive.