Reclining Chaise Lounge With Poly Material SKU: OP4004 V1.
• • • • • • • ALLEN WRENCH (PROVIDED) 1 WRENCH (PROVIDED) M6 x 90mm BOLT 2 2 PCS 6 22 PCS 7 WRENCH 3 M6 x 35mm BOLT 2 PCS 4 M6 NUT 5 M6 WASHER 2 PCS 2 PCS ALLEN WRENCH 1 PC 1 PC A M6 x 50mm BOLT LOUNGE BACKREST 1 PC B LOUNGE BASE 1 PC C LEFT REAR LEG 1 PC Page 1 of 7
PARTS D RIGHT REAR LEG E 1 PC G RIGHT FRONT LEG 1 PC LONG RAIL F 2 PCS 2 PCS H LEFT FRONT LEG 1 PC SHORT RAIL I RAIL 2 PCS Page 2 of 7
PRODUCT ASSEMBLY - OVERALL VIEW Look at the overall view of this chaise Lounge as below and learn the exact position of each part to be assembled. A H C B D E F I G PRODUCT ASSEMBLY 1 Attach part F Short Rail to 2 PCS of part E Long Rails with 2 PCS of hardware 2 Bolt. Pay attention that both the bevel ends of the long rail facing towards outside.
PRODUCT ASSEMBLY Attach part F Short Rail to the sharp end of part E Long Rail with 2 PCS of hardware 3 Bolt. 2 E 3 F E 3 Place part B Lounge Base and part A Lounge Backrest as below. 3 Attach part D Right Rear Leg to part B Lounge Base with 3 PCS of of hardware 2 Bolt. Attach part D Right Rear Leg to part A Lounge Backrest with 1 set of hardware 1 Bolt, hardware 5 Washer and hardware 4 Nut.
PRODUCT ASSEMBLY 4 Attach part G Right Front Leg to part B Lounge Base with 3 PCS of hardware 2 Bolt. 2 B 2 2 B 5 G 2 2 2 G Attach part C Left Rear Leg to part B Lounge Base with 3 PCS of hardware 2 bolt. Attach part C Left Rear Leg to part A Lounge Backrest with 1 set of hardware 1 Bolt, hardware 5 Washer and hardware 4 Nut. Attach part H Left Front Leg to part B Lounge Base with 3 PCS of hardware 2 Bolt.
PRODUCT ASSEMBLY 6 Attach 2 PCS of part I Rail between part D Right Rear Leg and part C Left Rear Leg as well as part G Right Front Leg and part H Left Front Leg with 4 PCS of hardware 2 bolt. 2 2 D I B C I 2 C 7 G H 2 Attach the combined Rail frame ( E +F ) between part C Left Rear Leg and part D Right Rear Leg with 4 PCS of hardware 2 Bolt. Pay attention to attach the rail frame with the BEVEL END towards the rear leg of the lounge.
PRODUCT ASSEMBLY 8 Position the supporting pole into the brackets on the rear legs for a comfortable rest. ATTENTION: Four positions available for adjustment (P1-P4 as below), you can choose to use.
