Use and Care Manual

3
3/3
4
5
A
B
60%
C
E
I
I
A
B
E
A
B
E
Align front legs in the seat pad as shown
in the diagram.
Secure both corner holes of the seat pad to
the chair back by using screws
MEDIUM SCREWS (E) with washers ( #A,B).
DO NOT FULLY TIGHTEN.
First HAND tighten All 4 screws TOGETHER
at the same time.
Tightened up-to 60-80% using key only
at this stage.
Put chair in the upright position and
SIT ON THE CHAIR to press downwards on the seat
pad ensuring that all 4 feet touch the ground and chair
is leveled.
Proceed to tighten all screws making sure
the chair remains level when tightening.
Check that all screws are tight on a regular
basis to ensure chair remains level and secure.
Also you can using adjustable
feet to keep four legs level .
100%