Use and Care Manual

1
2
2/3
Parts list:
G×1
H×1
I×2
Front Legs
Seat
Back
D
A
60%
C
H
G
D
B
A
Put chair back on a clean flat surface.
Place seat pad against chair back as
shown in diagram.
Secure center holes of the seat pad to
chair back by using SHORTER
SCREW (D) with Washer (#A,B).
DO NOT FULLY TIGHTEN.
First HAND tighten then tightened using
key up-to 60-80% only at this stage.
B
A
B
60%
C
F
A
B
F
Secure both corner holes of the
seat pad to the chair back by using
LONGER SCREWS (F) with
washers ( #A,B).
DO NOT FULLY TIGHTEN.
First HAND tighten All 4 screws
TOGETHER at the same time.
Tightened up-to 60-80% using key
only at this stage.
A×9
B×9
D×1
C×1
E×4
Φ8
M8
Φ8
M8x55MM
Shorter Screw
Lock washer
Flat washer
Allen key
M8x75MM
Longer Screw
Hardware:
M8x60MM
Medium Screw
F×4