ASSEMBLY INSTRUCTIONS Linen Fabric Upholstered Dining Chair 1/3
Hardware: A×9 B×9 G×1 C×1 D×1 Parts list: F×4 E×4 Back H×1 Φ8 Φ8 M8 M8x55MM I×2 M8x75MM M8x60MM Flat washer Lock washer Allen key Shorter Screw Medium Screw Longer Screw Seat Front Legs 1 Put chair back on a clean flat surface. Place seat pad against chair back as shown in diagram. C H D B A 60% D B Secure center holes of the seat pad to chair back by using SHORTER SCREW (D) with Washer (#A,B). A DO NOT FULLY TIGHTEN.
C 3 60% Align front legs in the seat pad as shown in the diagram. E B A Secure both corner holes of the seat pad to the chair back by using screws MEDIUM SCREWS (E) with washers ( #A,B). I DO NOT FULLY TIGHTEN. First HAND tighten All 4 screws TOGETHER at the same time. A E B EB Tightened up-to 60-80% using key only at this stage. A I 4 Put chair in the upright position and SIT ON THE CHAIR to press downwards on the seat pad ensuring that all 4 feet touch the ground and chair is leveled.
