Installation Guide

PRODUCT ASSEMBLY
3
4
Page 3 of 4
Align front legs in the seat pad
as shown in the diagram.
Secure both corner holes of the
seat pad to the chair back by
using screws MEDIUM SCREWS
(5) with washers ( #2,1).
DO NOT FULLY TIGHTEN.
First HAND tighten All 4 screws
TOGETHER at the same time.
Tightened up-to 60-80% using
key only at this stage.
60%
5
2
1
3
C
C
5
2
1
5
2
1
Put chair in the upright position
and SIT ON THE CHAIR to press
downwards on the seat pad
ensuring that all 4 feet touch
the ground and chair is leveled.
Proceed to tighten all screws
making sure the chair remains
level when tightening.
Check that all screws are tight
on a regular basis to ensure
chair remains level and secure.
Also you can using adjustable
feet to keep four legs level .
100%