INSTRUCTION MANUAL Outdoor Rocking Poly Adirondack Chair SKU: 2001-RC
NOTICE Do not overtighten screws. (Insert all screws before tighten screws.) • Please do not exceed the weight limitations of this item. • Do not stand on or use any part of this item as a step ladder. • Firmly secure all bolts, screws and nuts before use. • Reconfirm that all bolts, screws, and nuts are secure every 90 days. • Do not use or store this item in the proximity of open flame or flammable/combustible chemicals. • Be aware that some parts are heavy and have sharp edges.
PARTS D E RIGHT CHAIR ARM RIGHT CHAIR LEG 1 PC 1 PC G F LEFT CHAIR LEG H ROCKIING BASE 1 PC FRONT RAIL 1 PC 2 PCS PRODUCT ASSEMBLY - OVERALL VIEW 1 Look at following overall view of this chair and learn the exact position of each parts to be assembled.
PRODUCT ASSEMBLY 1 Attach part C Left Chair Arm to part E Left Chair Leg with 1 PC of part 2 bolt and part 6 washer and part 5 Nut. Do same to part F Right Chair Leg and part D Right Chair Arm. Do not tighten screws too much at this stage. C C 6 E 5 5 2 D 6 2 F 2 Attach part F right Chair Leg and part E Left Chair Leg to part A Chair Seat with 4 PCS of part 2 bolt and part 6 washer and part 5 Nut.
PRODUCT ASSEMBLY 3 Attach part F Backrest to part A Chair Seat and part D Right Chair Arm as well as part C Chair Left Arm with 2 PCS of part 1 Screw and 2 PCS of part 3 Screw. 1 F C 1 3 D A 3 4 Turn the chair upside down and fix part G Rocking Base to part E Chair Left Leg and fix with 2 PCS of part 4 Screw using a phillips screwdriver. Attache the rocking base to part A Chair Seat with 1 PC of part 2 bolt and part 6 washer and part 5 nut. Do the same to the other Rocking base.
PRODUCT ASSEMBLY 5 Attach part H Front rail with part G Rocking base to part G Rocking base and part E Left Chair Leg with 2 PCS of part 3 screw. Do the same to the right side to finish the assembly. 3 3 G E H Tighten all the screws and bolt connections to ensure a steady use of this chair.
