Specifications

inStallation Set-uP
Figure 93: Optional Front Installed.
Install the front by lifting it parallel to the
replace with the mounting bracket hooks
pointing towards the replace. Slide the hooks
all the way into the slots between the Glass
Door Frame and the drywall anges of the
replace. Pull down on each corner to make
sure the hook is engaged with the hanger.
Refer to Figures 92.
IMPORTANT: Ensure that the minimum gap
required between the Optional Front and wall
of the unit is maintained (refer to Figure 93).
Not maintaining the proper gap will cause the
unit to run at elevated temperatures and result
in an unsafe condition
The face should be cleaned before the replace
is turned on for the rst time.
optionaL FRont instaLLation:
Optional front is available for your replace. The replace front hang onto the front of your replace using four
(4) hooks, one on each corner (refer to Figure 91). These hooks secure the front to the replace, providing for
easy removal for service access to the replace and also to position the front the proper distance away from
the glass door and the replace facing.
Figure 91: Optional Front Parts.
Figure 92: Optional Front Being Installed.
44