Specifications

43
inStallation Set-uP
14. Install the Burner Assembly;
refer to Step 1 & 2 of log Burner /
emBer Bed insTallaTion.
15. Install the Left and Right Burner
Cover Support as shown in Figure
89. Each burner cover is installed
using three (3) T-20 Torx screws
supplied.
16. Install the Log burner accent to
the burner cover supports with
four (4) T-20 Torx as shown in
Figure 90.
17. Install the Grate and the Logs
Set to complete the installation.
Figure 89: Installing Burner Cover Supports
Figure 90: Installing The Log Burner Accent