Specifications

Figure 69b: Log 9 in Place.
inStallation Set-uP
Figure 68b: Log 1 in Place.
Figure 70b: Log 3 in Place
8. Install Log 1. Position log 1 to sit on the right grate nger and lean the log back to rest on the at
depression on log 9.
Figure 68a: Rest Log 1 in Place.
9. Install Log 4. Log 4 sits in between Log 2 and the grate nger and its body rests across the body of
Log 10. There is a groove cut out on log 10 for log 4 to rest on.
Figure 69a: Place Log on Grate Finger.
10. Install Log 3. Log 3 sits on the right grate nger. There is a notch across Log 6, which this log will
locate into. The edge along the back of this log will index into the notch of Log 6.
Figure 70a: Index Log 3 in Place
37