Specifications

inStallation Set-uP
36
6. Install Log 10. Place the end with number 10 against the notch on log 8 and rest the other end on the
groove of log 7. The edge along the bottom of this log will index into the groove of Log 7.
Figure 66a: Log 10 Rear End in Place. Figure 66b: Log 10 Front End in Place.
Figure 66b: Log 10 in Place.
7. Install Log 2. Position log 2 to sit on the left grate nger and lean the log back to rest on the at
depression on log 9.
Figure 67b: Log 2 in Place.Figure 67a: Position Log 2 on Grate Finger.