Specifications

14
Figure 16. Typical Facing for the Fireplace - General.
Planning your inStallation
The DV62 may be installed
with an optional front.
The front lift on and off
of the replace, providing
access to the replace for
regular maintenance and
service, see Optional Front
Installation.
You have 3 possible
scenarios when installing
facing to your replace.
Care must be taken to
ensure proper clearances are
maintained. Clearances are
required between optional
front and any stone work
applied to your replace
installation. Failure to
maintain this clearance will
lead to elevated operating
temperatures and possible
discoloration of materials
and or front.
Figure 17. Option 1 - Fireplace Facing Without Optional Front Installed
instaLLation oF FiRepLace Facing:
When installing the DV62 without the optional door sets, install the inner trim kit that is supplied with the unit.
The inner trim is fastened to the non-combustible wall board that comes with the unit and the rock/tile facing
covers over the trim ange as with any typical drywall ange. The rock or tile facing can be any thickness, but
once this unit is installed, you can no longer install the optional door sets
Three (3) possible installations include:
1) For replace facing without an optional front installed.
2) For replace facing greater than 1” thick with an optional front installed.
3) For any replace less than 1” thick (total facing and non-combustible board combined) with an optional
front installed.
Figures 17 to 19 highlight the relationships between the replace, optional front, and facing installed.
NOTE: Optional Door Front cannot be installed with the Porcelain Firebox Liner option.