Specifications

11
Figure 11. Typical Framing for Sidewalls & Mantel - General.
Figure 12. Typical Framing for Sidewalls & Mantel - Detailed.
Planning your inStallation
typicaL FRaming - siDewaLL anD manteL:
The mantel’s maximum overhang is 12”
(300mm) at the minimum height of 62”
(1575mm) measured from the base of
the replace.
The mantel can extend 1” (25.4mm)
further for every 1” (25.4mm) of height
it is installed over the minimum height.
Non-combustible mantels and
mantel legs are not limited to these
dimensions.
Mantel temperatures are monitored
during testing and can reach 117°F
(47°C) above room temperatures.
Make sure the nish on your mantel
is suitable for temperatures of this
range.