User`s guide

5-7

Basic Configuration

• ScriptingOptions: Provides access to a submenu that is used to configure the

Command Confirmation, Automated Mode, Command Prompt and IPS Mode

parameters as described in Section 5.3.6.

Note: In the Text Interface, the Scripting Options submenu is accessed via

item 12. To access the Scripting Options parameters via the Web Browser

Interface, place the cursor over the "General Parameters" link, wait for the flyout

menu to appear, then click on the "Scripting Options" link.

• PowerConfiguration: (VMR Only) In the Web Browser Interface, the Voltage

Calibration parameter, Power Factor parameter and Power Efficiency parameter are

defined via the System Parameters Menu. In the Text Interface, these parameters

reside in a separate submenu, which is accessed via the Power Configuration

option. For more information on Power Configuration, please refer to Section 5.3.5.

Note: The Power Configuration option is not available on NPS units.

• EnergyWiseConfiguration: Defines parameters that are needed in order for the

VMR or NPS to serve as an element in a Cisco

EnergyWise™ network. This item

allows the following parameters to be defined. (Default = Off.)

Note: In the Web Browser Interface, EnergyWise parameters are defined via

the "EnergyWise" link in the General Parameters fly-out menu.



Enable: Enables/disables the VMR/NPS unit's ability to particapate in a Cisco

Energywise network. (Default = Off)



Domain: The Energywise Domain Name; up to eighty characters long.

(Default = Undefined.)



Secret: A password that is used to authenticate each element in a Cisco

Energywise network. The Secret parameter can be up to eighty characters long.

(Default = Undefined.)

• SerialNumber: Allows the serial number for the VMR/NPS unit to be saved and

displayed. When this parameter is defined, the serial number can be displayed via

the Product Status screen in the Web Browser or by invoking the /J* command in

the Text Interface. Since the serial number plate on the VMR/NPS unit is not always

easily accessible after installation, it is often helpful to define the serial number here

in order to simplify the process of determining the serial number later.

(Default = undefined.)