User`s guide
17-4
Command Reference Guide
/SG Display Plug Group Status Screen
Displays the Plug Group Status Screen, which lists the available Plug Groups, the
numbers of the plugs included in each Plug Group, the current On/Off state, the user-
defined Boot/Sequence Delay value, and the Default On/Off value for each plug. For
more information, please refer to Section 8.4.
Note: In Administrator Mode all user defined Plug Groups are displayed. In
SuperUser Mode, User Mode and ViewOnly Mode, the Plug Group Status
Screen will only include the Plug Groups allowed by your account.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /SG [Enter]
/SN Display Network Status
Displays the Network Status Screen, which lists current network connections to the
VMR/NPS's Network Port. For more information, please refer to Section 8.2.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /SN [Enter]
/H Help
Displays a Help Screen, which lists all available Text Interface commands along with a
brief description of each command.
Note: In the Administrator Mode, the Help Screen will list the entire VMR/NPS
Text Interface command set. In SuperUser Mode, User Mode and ViewOnly
Mode, the Help Screen will only list the commands that are allowed by the
account's access level.
Availability: Administrator, SuperUser, User, ViewOnly
Format: /H [Enter]
/L Log Functions
Provides access to a menu which allows you to display the Audit Log, Alarm Log
Current Metering Log and Power Metering Log. For more information on Log Functions,
please refer to Section 5.3.3 and Section 8..
Note: Current and Power Metering functions are not available on NPS units.
Availability: Administrator, SuperUser
Format: /L [Enter]