User`s guide

17-2
Command Reference Guide
17.2. Command Summary
Function Command Syntax Command Access Level
Admin. SuperUser User ViewOnly
Display
Plug Status /S [s] [Enter] X X X X
Port Parameters (Who) /W [n][Enter] X X X X
Plug Group Status /SG [Enter] X X X X
Network Status /SN [Enter] X X X X
Help Menu /H [Enter] X X X X
Log Functions /L [Enter] X X
Current Metering /M [Enter] X X
Site ID / Unit Information /J [*] [Enter] X X X X
Control
Exit Command Mode /X [Enter] X X X X
Boot Plug n /BOOT <s>[,Y] [Enter] X X X
Turn Plug n On /ON <s>[,Y] [Enter] X X X
Turn Plug n Off /OFF <s>[,Y] [Enter] X X X
Default All Plugs /DPL[,Y] [Enter] X X X
Connect to Port /C [n] [Enter] X X X
Disconnect from Port /D [n][Enter] X X X
Send Parameter File /U [Enter] X
Send SSH Keys /K <k> [Enter] X
Unlock Invalid Access /UL [Enter] X
Configuration
System Parameters /F [Enter] X 
Serial Port Parameters /P [n] [Enter] X 
Plug Parameters /PL [Enter] X 
Plug Group Parameters /G [Enter] X 
Network Configuration - IPv4 /N [Enter] X 
Network Configuration - IPv6 /N6[Enter] X 
Reboot Options /RB [Enter] X 
Alarm Configuration /AC [Enter] X 
Reboot System /I [Enter] X X
Upgrade Firmware /UF [Enter] X
Test Network Configuration /TEST [Enter] X
 In Administrator Mode and SuperUser Mode, all VMR/NPS outlets are displayed. In User Mode and
ViewOnly Mode, the Plug Status Screen will only include the plugs that are allowed by your account.
 In Administrator Mode, all Plugs/Plug Groups are displayed. In SuperUser Mode, User Mode and
ViewOnly Mode, the status screen will only include the Plugs/Plug Groups allowed by the account.
 In Administrator Mode, the Help Menus will list all VMR/NPS commands. In the SuperUser Mode, User
Mode and ViewOnly Mode, the Help Menus will only list the commands that are allowed by the access
level.
 Current and Metering functions are not available on NPS units.
 If the optional asterisk (*) argument is included in the command line, this command will also show model
numbers, current ratings and software versions for the VMR/NPS unit.
 The ",Y" argument can be included in the command line to suppress the command confirmation prompt.
 In SuperUser Mode, configuration menus can be displayed, but parameters cannot be changed.