User`s guide

8-6
The Status Screens
To display the Current Metering Status Screen, proceed as follows:
• TextInterface: Type /M and press [Enter].
• WebBrowserInterface(VMROnly): Place the cursor over the "Current Metering"
link on the left hand side of the screen. When the fly-out menu appears, click on
the "Current Metering Status" link.
The Current Metering Status screen lists the following parameters:
• CurrentA: The total current consumption, in Amps, for power circuit A.
• VoltageA: The total voltage for power circuit A.
• PowerA: The total power consumption, in Watts, for power circuit A.
• CurrentB: The total current consumption, in Amps, for power circuit B (if present.)
• VoltageB: The total voltage for power circuit B (if present.)
• PowerB: The total power consumption, in Watts, for power circuit B (if present.)
• Temperature: The rack temperature(s) currently detected by the VMR unit(s).
• TotalCurrent: The total current, in Amps, for both power circuits.
• TotalPower: The total power, in Watts, for both power circuits.
• PowerFactor: The user-defined Power Factor value.
• PowerEfficiency: The user-defined Power Efficiency value.
• OverTemperature: (Text Interface Only) Lists the values for the Initial Threshold
and Critical Threshold for the Over Temperature Alarms. Note that when the
Current Metering Status Screen is viewed via the Web Browser Interface, Over
Temperature Alarm settings are not listed. To view Over Temperature Alarm settings
via the Web Browser Interface, please use the Current History Screen as described
in Section 8.6. For more information on the Over Temperature Alarms, please refer
to Section 7.2.
• OverCurrent: Lists the values (as a percentage) for the Initial Threshold and
Critical Threshold for the Over Current Alarms. For more information on the Over
Current Alarms, please refer to Section 7.1.