User`s guide

8-1
8. The Status Screens
The Status Screens are used to display status information about the switched outlets,
Network Port, Plug Groups, Current and Power Metering and the Alarm Log and Audit
Log. The Status Screens are available via both the Text Interface and Web Browser
Interface.
8.1. Product Status
The Product Status Screen lists the model number, power rating, input line count, input
line frequency and software version for your VMR/NPS unit. To display the Product
Status Screen via the Text Interface, type /J * and then press [Enter]. To display the
Product Status Screen via the Web Browser Interface, click on the "Product Status" link.
The Product Status Screen lists the following items:
• SiteID(Location): A user-defined text string that can be used to denote the
location of the VMR/NPS unit. To define the Site ID (Location) message, proceed as
described in Section 5.3.
• Product: The make/model number of the VMR/NPS unit.
• SerialNumber: Displays the serial number for the VMR/NPS unit, providing that
the serial number has been previously defined via the Systems Parameters menu as
described in Section 5.3
• SWVersion: The software version that is currently installed on the VMR/NPS unit.
• RAM: The amount of RAM memory installed on the VMR/NPS unit.
• Flash: The Amount of Flash memory installed on the VMR/NPS unit.
• EnergyWise: The supported EnergyWise version number.
Note: The Information provided by the Product Status Screen is intended
mainly to assist WTI support peronnel with the diagnosis of user equipment
problems.