User`s guide

5-58
Basic Configuration
 PlugAccess: (RSM-8R Series Units Only) Determines the default Plug Access
setting for new TACACS users. (Defaults; Administrator and SuperUser = All
Plugs On, User = All Plugs Off, ViewOnly = All Plugs Off.)
Notes:
• PowerControlfunctionsareonlyavailableonRSM-8RSeriesunits.ThePlug
AccessparameterisnotavailableonstandardTSMSeriesunitsorstandard
RSMSeriesunits.
• AdministratorandSuperUserlevelaccountsalwayshaveaccesstoallplugs.
• Userlevelaccountswillonlyhaveaccesstotheplugsthataredefinedviathe
"PlugAccess"parameter.
• ViewOnlyaccountsarenotallowedtoinvokeswitchingandreboot
commands.
 PlugGroupAccess: (RSM-8R Series Units Only) Determines the default Plug
Group Access setting for new TACACS users. For more information, please refer
to Section 5.6. (Defaults; Administrator and SuperUser = All Plug Groups On,
User = All Plug Groups Off, ViewOnly = All Plug Groups Off.)
Notes:
• PowerControlfunctionsareonlyavailableonRSM-8RSeriesunits.ThePlug
GroupAccessparameterisnotavailableonstandardTSMSeriesunitsor
standardRSMSeriesunits.
• Inordertousethisfeature,PlugGroupsmustfirstbedefinedasdescribedin
Section5.6.
• AdministratorandSuperUserlevelaccountswillalwayshaveaccesstoall
pluggroups.
• UserLevelaccountswillonlyhaveaccesstothepluggroupsthatare
definedviathePlugGroupAccessparameter.
• ViewOnlyaccountsarenotallowedtoinvokeswitchingandreboot
commands.
 ServiceAccess: Selects the default Service Access setting for new TACACS
users. The Service Access setting determines whether each account will be able
to access command mode via Serial Port, Telnet/SSH or Web. For example,
if Telnet/SSH Access is disabled for an account, then the account will not be
able to access command mode via Telnet or SSH. (Default = Serial Port = On,
Telnet/SSH = On, Web = On.)
• PingTest(PingTACACSServers): Allows you to ping IP addresses or domain
names that have been defined via the TACACS Parameters menus in order to check
that a valid IP address or domain name has been entered.
Notes:
• InorderforthePingTestfeaturetofunction,yournetworkand/orfirewall
mustbeconfiguredtoallowpingcommands.
• InadditiontothePingTestfeature,the/TESTcommandintheTextInterface
orthe"Test"optionintheWebBrowserInterfacecanalsobeusedtoping
anyuserdefinedIPaddressinordertomakecertainthattheIPaddressis
responding.